- Sign In
- |
- Sign Up
- |
- My Quote (0)
- |
- CART (0)
A suitable choice for various industries, the gas turbine flow meter utilizes a turbine wheel and electro-optical detection to convert flow rates into a linear 0 to 5 V DC output signal for recording and data logging. The Pelton design minimizes zero drift while maintaining fast response and linear outputs.
A suitable choice for various industries, the gas turbine flow meter utilizes a turbine wheel and electro-optical detection to convert flow rates into a linear 0 to 5 V DC output signal for recording and data logging. The Pelton design minimizes zero drift while maintaining fast response and linear outputs.
Features
Applications
| Power Requirements | 11.5 to 15 V DC |
| Power Consumption | 35 mA at 12 V DC |
| Output Signal | 0 to 5 V DC, minimum 2.5 kΩ load |
| Service | : Clean dry gases compatible with wetted materials |
| Wetted Materials | PPS, acetal, sapphire, glass, epoxy, and fluoroelastomer |
| Accuracy | ±3% of full-scale |
| Linearity | ±3% of full-scale |
| Repeatability | ±0.5% of full-scale |
| Temperature Limits | 41 to 131°F (5 to 55°C) Storage: 32 to 158°F (0 to 70°C) Sensitivity: ±0.2% of full-scale per °C |
| Pressure Limits | 40 psig (2.8 bar) |
| Process Connection | Compression fitting, see model table |
| Electrical Connections | Four-pin power and signal connector. A power adapter or mating cable required for operation. See accessories table |
| Enclosure Rating | IP10 (NEMA 1) |
| Weight | 0.16 lbs (75 g) |
| Agency Approvals | CE |
| Power Requirements | 11.5 to 15 V DC |
| Power Consumption | 35 mA at 12 V DC |
| Output Signal | 0 to 5 V DC, minimum 2.5 kΩ load |
| Service | : Clean dry gases compatible with wetted materials |
| Wetted Materials | PPS, acetal, sapphire, glass, epoxy, and fluoroelastomer |
| Accuracy | ±3% of full-scale |
| Linearity | ±3% of full-scale |
| Repeatability | ±0.5% of full-scale |
| Temperature Limits | 41 to 131°F (5 to 55°C) Storage: 32 to 158°F (0 to 70°C) Sensitivity: ±0.2% of full-scale per °C |
| Pressure Limits | 40 psig (2.8 bar) |
| Process Connection | Compression fitting, see model table |
| Electrical Connections | Four-pin power and signal connector. A power adapter or mating cable required for operation. See accessories table |
| Enclosure Rating | IP10 (NEMA 1) |
| Weight | 0.16 lbs (75 g) |
| Agency Approvals | CE |
