Dent ESP-I-WI-L ELITEpro SP Power Meter

Model: ESP-I-WI-L

Dent ESP-I-WI-L ELITEpro SP Power Meter

Model: ESP-I-WI-L

Canada/International Model, USB/Ethernet Communications, WIFI (internal antenna), Unterminated Leads, Portable Carry Case.

Canada/International Model, USB/Ethernet Communications, WIFI (internal antenna), Unterminated Leads, Portable Carry Case.

This product has been discontinued. Click here for the replacement model(s).


A dependable and versatile tool for measuring energy usage

The ELITEpro SP's capability, flexibility, size, and ease-of-use make it an ideal tool for recording power & energy consumption information in commercial, industrial, government and retail environments.

The ELITEpro SP is portable datalogger capable of measuring, storing, and analyzing electrical consumption data from the device or panel it's attached to. It uses direct connections to measure voltage and current on each phase of a single or three phase system from 0-600V.

ELITEpro SP measures and records voltage, current, kWh/kW energy and demand data as well as virtually all relevant energy parameters for diagnostics and monitoring. Electrical load diagnostic parameters such as power factor (both Apparent and Displacement) are captured in addition to energy and demand values.


Key Features

  • Works on single or 3-phase loads
  • Measures 0-600V (AC or DC) 0-6,000A AC (depending on CTs)
  • Line-powered - no need for batteries or external power source
  • User-selectable recording intervals as short as every 1 second
  • 8MB non-volatile memory standard
  • Better than 1% accuracy (<0.2% typical).
  • Standard fast USB port
  • Standard Ethernet port
  • Optional Bluetooth® communications
  • Optional Wi-Fi communications
  • Setup/Reporting software included
  • Patented PhaseChek™ indicators ensure correct CT orientation at installation
  • Mounts either inside panel with attached magnets or next to panel using mounting tab

Hardware Features

PhaseChek™

PhaseChek lights verify that that the CTs are correctly installed - green is good, red means that either a CT is incorrectly installed or that a CT is in the wrong orientation.

Mount Inside or Beside

Mount the ELITEpro SP inside the panel using the mounting magnets or beside the panel using the mounting tab

Log with Confidence

Indicator lights show that the meter is recording

Standard Ethernet Port

The Ethernet and USB ports are standard equipment, no additional costs


Connections

Voltage

Connections via fused or unfused crocodile clips or shark clips

Current

Use up to four channels of current via CTs connected to a terminal block

Power

Power is supplied via the voltage connections - no auxillary supply is required


Communications Options

Ethernet & USB

The Ethernet and USB ports are standard equipment

WiFi

Use optional WiFi to setup, record and view data remotely

WiFi with Antenna

Optional WiFi with external antenna provides 3dbi gain

Bluetooth

Optional Bluetooth provides short-range wireless configuration

Connect with USB (Standard Equipment)

Connect directly to the ELITEpro SP via the included A-to-B USB cable.


Connect with Ethernet (standard equipment)

Connect remotely to the logger via 10/100MB Ethernet using DHCP or static IP to manually or automatically download data or reconfigure


Connect with Wi-Fi (optional)

The optional Wi-Fi interface allows the meter to be connected to a Wi-Fi network and accessed from any PC on the network using ELOG software. Alternatively, configure the ELITEpro SP as its own Wi-Fi hotspot and view real-time data using a Wi-Fi enabled PC, tablet, or smart phone via a web browser from up to 300 ft. away. Two antenna options are available: internal antenna (75-300 ft.) or external 3 dbi antenna (150-300 ft). Use ELOG to switch between WiFi and QuickView™ access point mode


Connect with BlueTooth® (optional)

Save time and meet safety requirements by communicating with an ELITEpro SP without removing the electrical panel door. In addition to the standard USB and Ethernet ports, ELITEpro SP instruments may be equipped with an optional Bluetooth® wireless technology interface, which will allow a PC with a Bluetooth® wireless technology adapter running ELOG to connect to the ELITEpro SP over short distances (10-100 feet typical) to send setup tables or download data. PC must support Serial Port Profile (SPP)


Current Transformers

An Industry-Leading Selection of Quality Transformers

Choose from an interchangeable selection of CT options including split-core, clamp-on, hinged and flexible RoCoil™ types. The ELITEpro SP comes with an embedded Rogowski coil CT amplifier/integrator circuit so there is no need to provide external power when using our line of flexible RoCoil™ CTs.

All DENT CTs are internally shunted for intrinsically safe operation on energized conductors. Special high-accuracy CTs are available for existing CT secondary monitoring. The ELITEpro SP can monitor up to four single-phase loads, two three-phase (3-wire) Delta loads or one three-phase (4-wire) WYE load.


Software

Setup, download & analyze

ELOG software is used to program the meter, display metered values, and retrieve and analyze the collected data.

ELOG graphically displays recorded data, performs analysis, and facilitates automatic remote data collection. Data is also easily exported to popular spreadsheet and database programs for additional analysis.

You are provided with an unlimited site license to the software with purchase.


Outdoor Applications

Weatherproof Enclosure

Our optional NEMA 4 rated weathertight drop-in enclosure delivers stronger environmental integrity, separate voltage plugs, watertight connectors for both the current leads and the power and communication cables.

This option for the ELITEpro SP will meet the stringent requirements of remote data logging.


Additional Features

Line Powered with Reduced Impact on Environment:

The ELITEpro SP is powered directly from the phases of the service being measured. It incorporates a broadband power supply which operates on virtually any 80-600V service. You will not have to worry about constantly changing or recharging batteries, nor finding an external power source at the job site. And you will avoid the negative environmental impact of disposing of batteries containing rare earth materials that are difficult to recycle or reclaim.


Memory for Extended Recording

Measurements are stored in on-board memory at recording intervals selected by the user, which can be as short as one second or as long as once every 24 hours. The ELITEpro SP has 8MB of internal non-volatile memory, which allows for long-term logging sessions. For example, with a WYE setup and recording all available system measurements ON with 2 minute integration interval, the ELITEpro SP can log for over 80 days!


Bi-Directional Metering for Renewable Studies

The ELITEpro SP design delivers bi-directional metering, which is capable of monitoring power generated by a renewable energy source versus power imported from the grid-ideal for solar power measurements.


Fast Sampling Rate Captures Power Quality Data

Regardless of the user-selectable recording interval, the ELITEpro SP has a waveform sampling frequency of 12 kHz. This is the number of data points the logger samples on each AC waveform (200 points per cycle at 60 Hz; 240 points per cycle at 50 Hz). The channel sampling rate is 8 Hz or every 125 mSec. This fast sampling rate allows for real-time display of voltage and current waveforms and harmonics.


Field-Proven: Rugged & Compact

Measuring in at only 21.6 x 6.3 x 4.7 cm (8.5" x 2.5" x 1.9") and weighing 340 grams (12 ounces), the ELITEpro SP was designed to fit inside panels for safety and convenience. Its rugged plastic housing is even supplied with magnets on the housing to facilitate mounting.


Applications

  • Measurement and Verification (M&V) Studies
  • Electrical Load Profiling
  • Energy Audits
  • New Technology Assessment Studies

Specifications

Technical
Service Type

Single Phase (two wire or three wire), Three Phase-Four Wire (WYE), Three Phase-Three Wire (Delta)

Voltage Channels

3 channels, CAT III, 0-600 VAC or 850 VDC (line-to-line)

Current Channels

4 channels, .67 VAC max, 333 mV full scale CTs

Maximum Current Input
200% of current transducer rating
Measurement Type
True RMS using high-speed digital signal processing (DSP)
Live Frequency
50/60/400 Hz
Waveform Sampling
12 kHz
Channel Sampling Rate
.125 seconds
Measurements

Volts, Amps, Amp-Hrs (Ah), kW, kWh, kVAR, kVARh, kVA, kVAh, Displacement Power Factor (dPF). All parameters for each phase and for system total.

Accuracy
Better than 1% (<0.5% typical) for V, A, kW, kVAR, kVA, PF
Resolution

0.01 Amp, 0.1 Volt, 1 Watt, 1 VAR, 1 VA, 0.01 PF

LED Indicators

Bi-colors (red and green): 1 LED to indicate communication, 4 LEDs for correct phasing (PhaseChek™: green when voltage and current on the same phase; red when incorrectly wired.) 2 LED Output indicators.

Pulse Output

Open collector with 10K ohm pull up to 5V, 75 mA max current

Power
Line Power

From L1 Phase to L2 Phase. 80-600VAC CAT III 50/60 Hz, 70 mA max. Non-user replaceable .5 Amp internal fuse protection

Power In
6-10 VDC, 500 mA
Power Out
6 VDC, 200 mA max
Communications

USB (Standard)

USB standard. 1.8 M (6 FT) A-to-B USB Cable (included)

Ethernet (Standard)

Standard RJ-45 Connector supports 10/100 MB Ethernet over Cat 5 or better. Confi gure for DHCP or Static IP address.

Bluetooth Wireless Technology (optional)

Internal antenna with 10-100 ft range (typical). Requires Bluetooth® wireless technology adapter on Windows PC. Adapter must support the Serial Port Profile (SPP).

WiFi Adapter (optional)

Internal Wi-Fi adapter with two separate configurations:
• Internal antenna: typical range 75-300 ft.
• External 3 dbi antenna: typical range 150-300 ft.

Mechanical
Operating Temperature
-7 to + 60 °C (20 to 140 °F)
Operating Humidity
5% to 95% non-condensing
Enclosure Type
ABS plastic, 94-V0 ? ammability rating
Weight
340 g (12 ounces)
Dimensions
21.6 x 6.3 x 4.7 cm (8.5" x 2.5" x 1.9")
1

What's included with the Dent ESP-I-WI-L

  • Dent ESP-I-WI-L ELITEpro SP Power Meter
  • Customer Reviews for the Dent ESP-I-WI-L

    Ask a question about Dent ESP-I-WI-L ELITEpro SP Power Meter

    A dependable and versatile tool for measuring energy usage

    The ELITEpro SP's capability, flexibility, size, and ease-of-use make it an ideal tool for recording power & energy consumption information in commercial, industrial, government and retail environments.

    The ELITEpro SP is portable datalogger capable of measuring, storing, and analyzing electrical consumption data from the device or panel it's attached to. It uses direct connections to measure voltage and current on each phase of a single or three phase system from 0-600V.

    ELITEpro SP measures and records voltage, current, kWh/kW energy and demand data as well as virtually all relevant energy parameters for diagnostics and monitoring. Electrical load diagnostic parameters such as power factor (both Apparent and Displacement) are captured in addition to energy and demand values.


    Key Features

    • Works on single or 3-phase loads
    • Measures 0-600V (AC or DC) 0-6,000A AC (depending on CTs)
    • Line-powered - no need for batteries or external power source
    • User-selectable recording intervals as short as every 1 second
    • 8MB non-volatile memory standard
    • Better than 1% accuracy (<0.2% typical).
    • Standard fast USB port
    • Standard Ethernet port
    • Optional Bluetooth® communications
    • Optional Wi-Fi communications
    • Setup/Reporting software included
    • Patented PhaseChek™ indicators ensure correct CT orientation at installation
    • Mounts either inside panel with attached magnets or next to panel using mounting tab

    Hardware Features

    PhaseChek™

    PhaseChek lights verify that that the CTs are correctly installed - green is good, red means that either a CT is incorrectly installed or that a CT is in the wrong orientation.

    Mount Inside or Beside

    Mount the ELITEpro SP inside the panel using the mounting magnets or beside the panel using the mounting tab

    Log with Confidence

    Indicator lights show that the meter is recording

    Standard Ethernet Port

    The Ethernet and USB ports are standard equipment, no additional costs


    Connections

    Voltage

    Connections via fused or unfused crocodile clips or shark clips

    Current

    Use up to four channels of current via CTs connected to a terminal block

    Power

    Power is supplied via the voltage connections - no auxillary supply is required


    Communications Options

    Ethernet & USB

    The Ethernet and USB ports are standard equipment

    WiFi

    Use optional WiFi to setup, record and view data remotely

    WiFi with Antenna

    Optional WiFi with external antenna provides 3dbi gain

    Bluetooth

    Optional Bluetooth provides short-range wireless configuration

    Connect with USB (Standard Equipment)

    Connect directly to the ELITEpro SP via the included A-to-B USB cable.


    Connect with Ethernet (standard equipment)

    Connect remotely to the logger via 10/100MB Ethernet using DHCP or static IP to manually or automatically download data or reconfigure


    Connect with Wi-Fi (optional)

    The optional Wi-Fi interface allows the meter to be connected to a Wi-Fi network and accessed from any PC on the network using ELOG software. Alternatively, configure the ELITEpro SP as its own Wi-Fi hotspot and view real-time data using a Wi-Fi enabled PC, tablet, or smart phone via a web browser from up to 300 ft. away. Two antenna options are available: internal antenna (75-300 ft.) or external 3 dbi antenna (150-300 ft). Use ELOG to switch between WiFi and QuickView™ access point mode


    Connect with BlueTooth® (optional)

    Save time and meet safety requirements by communicating with an ELITEpro SP without removing the electrical panel door. In addition to the standard USB and Ethernet ports, ELITEpro SP instruments may be equipped with an optional Bluetooth® wireless technology interface, which will allow a PC with a Bluetooth® wireless technology adapter running ELOG to connect to the ELITEpro SP over short distances (10-100 feet typical) to send setup tables or download data. PC must support Serial Port Profile (SPP)


    Current Transformers

    An Industry-Leading Selection of Quality Transformers

    Choose from an interchangeable selection of CT options including split-core, clamp-on, hinged and flexible RoCoil™ types. The ELITEpro SP comes with an embedded Rogowski coil CT amplifier/integrator circuit so there is no need to provide external power when using our line of flexible RoCoil™ CTs.

    All DENT CTs are internally shunted for intrinsically safe operation on energized conductors. Special high-accuracy CTs are available for existing CT secondary monitoring. The ELITEpro SP can monitor up to four single-phase loads, two three-phase (3-wire) Delta loads or one three-phase (4-wire) WYE load.


    Software

    Setup, download & analyze

    ELOG software is used to program the meter, display metered values, and retrieve and analyze the collected data.

    ELOG graphically displays recorded data, performs analysis, and facilitates automatic remote data collection. Data is also easily exported to popular spreadsheet and database programs for additional analysis.

    You are provided with an unlimited site license to the software with purchase.


    Outdoor Applications

    Weatherproof Enclosure

    Our optional NEMA 4 rated weathertight drop-in enclosure delivers stronger environmental integrity, separate voltage plugs, watertight connectors for both the current leads and the power and communication cables.

    This option for the ELITEpro SP will meet the stringent requirements of remote data logging.


    Additional Features

    Line Powered with Reduced Impact on Environment:

    The ELITEpro SP is powered directly from the phases of the service being measured. It incorporates a broadband power supply which operates on virtually any 80-600V service. You will not have to worry about constantly changing or recharging batteries, nor finding an external power source at the job site. And you will avoid the negative environmental impact of disposing of batteries containing rare earth materials that are difficult to recycle or reclaim.


    Memory for Extended Recording

    Measurements are stored in on-board memory at recording intervals selected by the user, which can be as short as one second or as long as once every 24 hours. The ELITEpro SP has 8MB of internal non-volatile memory, which allows for long-term logging sessions. For example, with a WYE setup and recording all available system measurements ON with 2 minute integration interval, the ELITEpro SP can log for over 80 days!


    Bi-Directional Metering for Renewable Studies

    The ELITEpro SP design delivers bi-directional metering, which is capable of monitoring power generated by a renewable energy source versus power imported from the grid-ideal for solar power measurements.


    Fast Sampling Rate Captures Power Quality Data

    Regardless of the user-selectable recording interval, the ELITEpro SP has a waveform sampling frequency of 12 kHz. This is the number of data points the logger samples on each AC waveform (200 points per cycle at 60 Hz; 240 points per cycle at 50 Hz). The channel sampling rate is 8 Hz or every 125 mSec. This fast sampling rate allows for real-time display of voltage and current waveforms and harmonics.


    Field-Proven: Rugged & Compact

    Measuring in at only 21.6 x 6.3 x 4.7 cm (8.5" x 2.5" x 1.9") and weighing 340 grams (12 ounces), the ELITEpro SP was designed to fit inside panels for safety and convenience. Its rugged plastic housing is even supplied with magnets on the housing to facilitate mounting.


    Applications

    • Measurement and Verification (M&V) Studies
    • Electrical Load Profiling
    • Energy Audits
    • New Technology Assessment Studies

    Specifications

    Technical
    Service Type

    Single Phase (two wire or three wire), Three Phase-Four Wire (WYE), Three Phase-Three Wire (Delta)

    Voltage Channels

    3 channels, CAT III, 0-600 VAC or 850 VDC (line-to-line)

    Current Channels

    4 channels, .67 VAC max, 333 mV full scale CTs

    Maximum Current Input
    200% of current transducer rating
    Measurement Type
    True RMS using high-speed digital signal processing (DSP)
    Live Frequency
    50/60/400 Hz
    Waveform Sampling
    12 kHz
    Channel Sampling Rate
    .125 seconds
    Measurements

    Volts, Amps, Amp-Hrs (Ah), kW, kWh, kVAR, kVARh, kVA, kVAh, Displacement Power Factor (dPF). All parameters for each phase and for system total.

    Accuracy
    Better than 1% (<0.5% typical) for V, A, kW, kVAR, kVA, PF
    Resolution

    0.01 Amp, 0.1 Volt, 1 Watt, 1 VAR, 1 VA, 0.01 PF

    LED Indicators

    Bi-colors (red and green): 1 LED to indicate communication, 4 LEDs for correct phasing (PhaseChek™: green when voltage and current on the same phase; red when incorrectly wired.) 2 LED Output indicators.

    Pulse Output

    Open collector with 10K ohm pull up to 5V, 75 mA max current

    Power
    Line Power

    From L1 Phase to L2 Phase. 80-600VAC CAT III 50/60 Hz, 70 mA max. Non-user replaceable .5 Amp internal fuse protection

    Power In
    6-10 VDC, 500 mA
    Power Out
    6 VDC, 200 mA max
    Communications

    USB (Standard)

    USB standard. 1.8 M (6 FT) A-to-B USB Cable (included)

    Ethernet (Standard)

    Standard RJ-45 Connector supports 10/100 MB Ethernet over Cat 5 or better. Confi gure for DHCP or Static IP address.

    Bluetooth Wireless Technology (optional)

    Internal antenna with 10-100 ft range (typical). Requires Bluetooth® wireless technology adapter on Windows PC. Adapter must support the Serial Port Profile (SPP).

    WiFi Adapter (optional)

    Internal Wi-Fi adapter with two separate configurations:
    • Internal antenna: typical range 75-300 ft.
    • External 3 dbi antenna: typical range 150-300 ft.

    Mechanical
    Operating Temperature
    -7 to + 60 °C (20 to 140 °F)
    Operating Humidity
    5% to 95% non-condensing
    Enclosure Type
    ABS plastic, 94-V0 ? ammability rating
    Weight
    340 g (12 ounces)
    Dimensions
    21.6 x 6.3 x 4.7 cm (8.5" x 2.5" x 1.9")
    1

    What's included with the Dent ESP-I-WI-L

  • Dent ESP-I-WI-L ELITEpro SP Power Meter
  • Ask a question about Dent ESP-I-WI-L ELITEpro SP Power Meter

    Customer Reviews for the Dent ESP-I-WI-L

    More Dent Products

    Calibration Lab