BW Technologies MC2-XW0M-Y-NA GASALERT MICROCLIP, 3-GAS DETECTOR (C0/O2/LEL)

• Simple one-button operation
• Standard datalogger (16 hours) and eventlogger (10 events)
• Durable, stainless steel alligator clip
• Rugged, ultra-compact (4.2 x 2.4 x 1.4 in / 10.7 x 6.0 x 3.6 cm) and lightweight (5.6 oz. / 160 g)
• Integral concussion-proof boot for the most rugged environments
• Continuous LCD shows simultaneous gas concentrations for H2S,CO, O2, and combustibles (0-100% LEL or 0-5.0% Methane)
• Powered by a lithium polymer battery (run-time typically 14 hours;recharge in less than 3 hours)
• Provides 95 dB alarm tone and bright wide-angled alarm bars
• Equipped with internal vibrating alarm for high noise areas
• Backlight: in alarm (auto) and on demand reactivation
• Four alarm levels: Instant Low and High Alarm for all gases;TWA (time weighted average) and STEL (short term exposure limit) for H2S, CO; OL (over limit alarm)
• Simple automatic calibration procedure
• Fully compatible with BW's MicroDock II automatic test and calibration system
• Records TWA, STEL and maximum exposures to gas and displays readings on command
• User selectable options include: confi dence beep, latching alarm, calibration due date, bump due date, "SAFE" display function, multi-language, span concentration values, combustible sensor measurement selection (0-100%LEL or 0-5.0% v/v methane) and stealth mode
• Full function self-test of: sensor, battery, circuitry and audible/visual/vibration alarms
• Delivered ready for use with sensors, lithium polymer battey, stainless steel alligator belt clip, calibration hose/cap and instructions

Specifications:

• Measureing Range:
• O2: 0-25.0%
• CO: 0-500 ppm
• Auto zero: Yes
• Calibration: Automatic
• Backlight: Low light (auto); alarm condition (auto); reactivation on demand
• Full function self-test: Sensor integrity, circuitry and battery; audible/visual alarms
• Sensor: Plug-in, electrochemical cell (toxic and oxygen); catalytic (LEL)
• User field options: Confidence beep, pass code protection, latching alarms, calibration due date, “SAFE” display function
• Alarm Indicators
• Visual alarms: Two flashing alarm bars visable from all angles
• LCD: indicates gas present and alarm levels encountered
• Audible alarm: Typically 95 dB at 30 cm variable pulsed audible alarm
• Vibrator alarm: Pulses warning in gas alarm conditions, or for any status alarms
• Other: Low battery, over range, multiple gas and missing sensor
• Alarm Levels: Instantaneous Low Alarm for all gases; instantaneous High Alarm for all gases; TWA (time weighted average) and STEL (short term exposure limit) for H2S and/or CO; OL (over limit alarm) for combustible gases
• LCD: Continuous, alphanumeric gas readout and status display
• Gases monitored: H2S, CO, O2, combustibles (0-100% LEL or 0-5.0% methane)
• Gas concentration: Simultaneous and continuously displays gas concentration(s) present (in ppm, %LEL, or % v/v)
• TWA ppm or %: Records STEL and TWA exposures and displays on demand
• Peak ppm or %: Records and displays peak exposure to gas and displays on demand
• Alarm setpoints: Displayed on activation
• Tests
• Full function self-test: Full function self-test on activation
• Battery: Continuous
• General Specifications
• Operating temperature: -4 to 122°F / -20 to 50°C
• Humidity: 5% to 95% RH (non-condensing)
• EMI/RFI: Complies with EMC Directive 89/336/EEC
• Ingress Protection: IP65
• Battery run-time: 16-18 hours on two AA alkaline cells / 14-16 hours on two NiMH rechargeable cells
• Size: 2.4 x 4 x 1.3 in. / 6 x 10 x 3.3 cm
• Weight: 7.4 oz. / 211 g
• Warranty: Full 2 year warranty including all sensors
• Datalogger Options: User-downloadable datalogger
• Data recorder: All events and occurrences
• Sampling rate: Factory set at 5-second intervals and user-settable from 1 to 127-second intervals
• Storage: 4.4 months of continuous data via 32 MB Flash MMC card (64 MB cards are also available)