BinMaster BMRX-115VAC Offers

The BinMaster BMRX-100 rotary level indicator is an electromechanical device used in solids and powders to prevent overfills, dry runs, or process shutdowns. It has no printed circuit board, so it’s impervious to moisture and vibration found in many tough processing environments. This rotary level indicator power pac features a screw-off cover, 3/4" NPT dual conduit entries, an SPDT mechanical switch, and an FDA-recognized powder coat finish.

Once installed, the enclosure can be rotated. This unique feature makes it easy to ensure conduit entries are always pointed toward the ground, mitigating the risk of moisture damaging internal components. New wire guides also ensure wires don’t get stuck as you push them through conduit entries. Moreover, it is an affordable paddle-style level switch for point level alerts in solids and powders with a bulk density of 2 lb. to over 100 lb./cu. ft.

Features

• Simple operation and reliable mechanical design for level indication in storage and processing conditions where hazloc certification is not required
• It works by turning a paddle continuously until stopped by material, then closes a relay to indicate a change in status
• Detects high and low levels: used as a high-level alert to prevent overfilling vessels.
• When mounted near the bottom or in the cone of the vessel, it alerts to low levels to avoid material shortages that can lead to shutting down production processes
• Alerts via a light or horn: Wire the BMRX-100 to a light or horn to alert when a full or empty condition occurs
• Wire it to shut off a process, such as stopping a grain leg or conveyor, when a vessel is full
• Enclosure rotates to point conduit entries down upon installation to protect internal components from moisture
• Adaptable to many bulk solid materials: With a wide selection of paddles, the BMRX-100 rotary adapts to light, medium, and heavy-weight materials
• Use one of BinMaster’s collapsible paddles (sold separately) to avoid entering the vessel when you install or replace the rotary
• Add a stainless-steel process connection to ensure durability in corrosive or caustic materials
• Motors made by BinMaster in the USA
• Interchangeable with other rotaries
• Easy-open, screw off cap
• Easy ¾" (1.91 cm) NPT wiring access

Applications

• Process control: High, demand, and empty level indication
• Level detection: Point level detection of bulk solids
• Overflow prevention: High level alerts to avoid overfilling
• Conveyors: Detect overloaded or empty conveyors
• Plugged chutes: Detect when chutes get clogged with materials
• Material outages: Low level alerts to eliminate empty vessel conditions