- Sign In
- |
- Sign Up
- |
- My Quote (0)
- |
- CART (0)
Terminating a Packard-connector pressure transmitter, this harness runs 20' of shielded cable from the sensor back to the panel. One end plugs onto the transmitter and the other lands as flying leads straight on a terminal block, so the run needs no field-assembled connector and no adapter. Ordering it alongside the transmitter keeps the installation to one part number per end.
Terminating a Packard-connector pressure transmitter, this harness runs 20' of shielded cable from the sensor back to the panel. One end plugs onto the transmitter and the other lands as flying leads straight on a terminal block, so the run needs no field-assembled connector and no adapter. Ordering it alongside the transmitter keeps the installation to one part number per end.
The GP Series is designed to provide excellent accuracy and reliability in commercial, industrial, and process control applications where performance is critical. The bulk micro-machined transducer features a stainless steel diaphragm with welded construction that contains no O-rings, which makes them compatible with any gas or liquid compatible with 304L stainless steel. Some of the compatible gases and liquids include refrigerants, glycol, motor oil, diesel, hydraulic fluid, brake fluid, water, waste water, Hydrogen, Nitrogen and air. The GP Series transducers can also be ordered in an optional NEMA 4 rated, weatherproof metal enclosure or a NIST Calibration Certificate.
Features
Applications
| Accuracy @ 22°C (71.6°F) | 15 to 60 psig: < ± 1.0% FS | 75 to 300 psig: < ± 0.5% FS | 500 psis 3: < ± 0.5% FS |
| Stability (250 Hours @ 225°F (125°C)) | ± 0.03% FS @ 0 PSIG; ± 0.12% FS @ 1000 PSIG |
| Output Signal | 4 to 20 mA (2-Wire, Loop Powered) |
| Maximum Load Resistance | 800 Ohms @ 24 V DC | Formula: (Supply VDC - 8 V DC) / 0.020A |
| Supply Current | 25 mA minimum |
| Supply Voltage | 250 Ohm Load: +13 to 30 V DC | 500 Ohm Load: 18 to 30 V DC |
| Reverse Polarity Protection | ± 16 V over 5 minutes |
| Cable Length | 20' |
| Recommended Torque Specification | 150 lbs-in (16.95 Nm) |
| Burst Pressure | 15 to 300 psig: 3x FS | 500 psis: 3x FS |
| Media Types | Any gas or liquid compatible with 304L Stainless Steel |
| Proof Pressure | 15 to 300 psig: 3x FS | 500 psis: 3x FS |
| Thermal Error (-40° to 105°C) | 15 to 60 psig: < ± 1.0 FS | 75 to 300 psig: < ± 0.5% FS | 500 psis 3: < ± 0.5% FS |
| Thermal Shock | 300 Cycles (105°C to -40°C, 0.5 hr soaks @ Temp. (2s Transfer)) |
| Vibration (100 to 2000Hz, 20g Sinusoidal, 3 Axes) | 144 Hours |
| Operating Humidity Range | 0 to 95% RH, non-condensing |
| Operating Temperature Range | -40 to 257°F (-40 to 125°C) |
| Storage Temperature Range | -40 to 176°F (-40 to 80°C) |
| Process Fitting Material | Thread Size | 304L Stainless Steel | 1/4"-18 NPT |
| Transducer Housing Material | Stainless Steel |
| Product Weight | 0.62 lbs (281 g) |
| Approvals | EMC Compliance: 10 V/m (EN61000-4-3), CE, RoHS2, WEEE, ISO 9001 |
| Accuracy @ 22°C (71.6°F) | 15 to 60 psig: < ± 1.0% FS | 75 to 300 psig: < ± 0.5% FS | 500 psis 3: < ± 0.5% FS |
| Stability (250 Hours @ 225°F (125°C)) | ± 0.03% FS @ 0 PSIG; ± 0.12% FS @ 1000 PSIG |
| Output Signal | 4 to 20 mA (2-Wire, Loop Powered) |
| Maximum Load Resistance | 800 Ohms @ 24 V DC | Formula: (Supply VDC - 8 V DC) / 0.020A |
| Supply Current | 25 mA minimum |
| Supply Voltage | 250 Ohm Load: +13 to 30 V DC | 500 Ohm Load: 18 to 30 V DC |
| Reverse Polarity Protection | ± 16 V over 5 minutes |
| Cable Length | 20' |
| Recommended Torque Specification | 150 lbs-in (16.95 Nm) |
| Burst Pressure | 15 to 300 psig: 3x FS | 500 psis: 3x FS |
| Media Types | Any gas or liquid compatible with 304L Stainless Steel |
| Proof Pressure | 15 to 300 psig: 3x FS | 500 psis: 3x FS |
| Thermal Error (-40° to 105°C) | 15 to 60 psig: < ± 1.0 FS | 75 to 300 psig: < ± 0.5% FS | 500 psis 3: < ± 0.5% FS |
| Thermal Shock | 300 Cycles (105°C to -40°C, 0.5 hr soaks @ Temp. (2s Transfer)) |
| Vibration (100 to 2000Hz, 20g Sinusoidal, 3 Axes) | 144 Hours |
| Operating Humidity Range | 0 to 95% RH, non-condensing |
| Operating Temperature Range | -40 to 257°F (-40 to 125°C) |
| Storage Temperature Range | -40 to 176°F (-40 to 80°C) |
| Process Fitting Material | Thread Size | 304L Stainless Steel | 1/4"-18 NPT |
| Transducer Housing Material | Stainless Steel |
| Product Weight | 0.62 lbs (281 g) |
| Approvals | EMC Compliance: 10 V/m (EN61000-4-3), CE, RoHS2, WEEE, ISO 9001 |
