Kaltman Creations HF6060 RF Field Spectrum Analyzer
FEATURES:
- 1MHz – 6GHz
- Peak Power Detector – 6GHz (Opt)
- Level Min -120dbm
- Level Max 0dbm
- Pwr Flux Density Min 10pW/m2
- Pwr Flux Density Max 10W/m2
- Attenuation "Auto", 0, 10, 20, 30dB
- Filter Bandwidth Min 100KHz
- Filter Bandwidth Max 50MHz
- Accuracy +/- 3dB
- 3 Automatic Peak Markers
- Peak, RMS and Hold Functions
- Internal & PC Logging
- Comes with a 1300mAH battery
- Mini Tripod Stand included
Exterior ergonomic design
The Spectran Analyzers feature a lightweight, sleek design with a large LCD display. There is a DC power jack to externally power and to charge the unit, an audio-output jack, a Jog Dial for cursor positioning and Zoom functions, a USB port for PC interface, and an SMA RF input connector. Pre-programmed Hot Keys, menu access, and arrow navigation keys are just a few of the extensive front panel controls.
Cursor adjustment
By initializing the jog dial you can position the cursor anywhere within the viewed frequency spectrum. The cursor position is readout in both frequency and level. By clicking the Jog Dial, you are able to Zoom-in on the cursors position (essentially decreasing the span) all the way down to 100KHz resolution. This allows you to isolate unused frequencies ranges, measure the total bandwidth of a given frequency, view inter-modulation and aliasing, and of course have a detailed analysis of occupied RF areas.
PC Software
Included with every Spectran RF Spectrum Analyzer is PC software. A powerful feature of the software allows you to repeatably zoom in and out through the use of click & drag highlighting techniques. You can also click on any point on the display for an instant reading of the frequency and values. The PC software also provides for data logging, instant screen shot capture, and enhanced graphical display viewing.
