Voltage input amplifier This UNIT is equipped with circuits for two independently usable input channels. Simply slot the 8936 into the MEMORY HiCORDER for use. SPECIFICATIONS:

• Input Number of channels: 2, Connector:Insulated BNC * Input isolated from output, inter-channel isolation
• Measurement ranges 5 mV to 20 V/division, 12 ranges, the measurement resolution is 1/80 of range
• AC voltage for possible measurement/display using the memory function:280 V rms * When attached to recorder where full-scale (f.s.) = 20 divisions
• 10 mV to 50 V/division, 12 ranges, the measurement resolution is 1/160 of range
• AC voltage for possible measurement/display using the memory function:280 V rms * When attached to recorder where full-scale (f.s.) = 10 divisions
• Low-pass filter:5/500/5 k/100 kHz
• Maximum sampling rate 1 MS/s (simultaneous sampling of two channels)
• Accuracy DC amplitude: ±0.4 %f.s. Zero-position: ±0.1 %f.s.
• Zero-position -50 % to 150 %, 1 % step * With zero-adjustment function
• Frequency characteristics DC to 400 kHz ±3 dB with AC coupling: 7 Hz to 400 kHz ±3 dB
• Max. allowable input 400 V DC (upper voltage which when applied to between input pins does not damage them)
• Max. rated voltage to earth 370 V AC, DC (upper voltage which when applied to input channel casing or between input channels does not damage them)
• Accessories None * The input cord is optional