For a Perfect Network

• Wire map check for checking wiring during installation
• Cable length check for detecting the location of cable breaks
• Direction check for confirming cable connections

• Measurable cable UTP cable: Characteristic impedance 100 ohm , CAT 3, 4, 5, 5e
• Measurable connector RJ-45 connector
• WireMap check Can check wiring status using the WIREMAP TERMINATOR 9336
• Error detection: Open, short, other wiring errors (Split pairs cannot be detected.)
• Cable length check Measured length: 2 to 300m when results are displayed in feet: 6.6 to 984 ft
• Measurement accuracy: ± (15% rdg. + 1 m) when results are displayed in feet: ± (15% rdg. + 3.3 ft)
• Display resolution: 0.1 m when results are displayed in feet: 0.3 ft
• Direction check Can identify five cables using the optional DIRECTION TERMINATOR 9337
• Display LCD
• Power supply LR6(AA) alkaline battery × 6, Continuous use 250 hours (when measuring once per minute)
• Dimensions, mass 98 mm(3.86 in)W × 160 mm(6.30 in)H × 38 mm(1.50 in)D, 290g(10.3 oz)
• Accessories WIREMAP TERMINATOR 9336 (1), CARRYING CASE 3853(1)