The true RMS is shown in the distorted waveform

• AC Current/Voltage, Frequencies, Resistance, Conduction check, Temperature (probe sold separately)
• Wave peak value, Waveform distortion check
• Auto-power off to prevent the power from being left on
• Non-fuse type protects up to 600 V AC

• AC Current range 30.00 to 600 A AC, 3 ranges (±1 % rdg. ±5 dgt. at 50 or 60Hz), Effective value rectifier
• Wave peak value at AC Current 30.0 to 600 A peak, 3 ranges (±3 % rdg. ±5 dgt. at 50 or 60Hz)
• AC Voltage range 300.0 or 600 V AC, 2 ranges (±1 % rdg. ±3 dgt. at 50 or 60Hz), Effective value rectifier
• Wave peak value at AC Voltage up to 300 or 600 V peak, 2 ranges (±3 % rdg. ±5 dgt. at 50 or 60Hz)
• Other functions Distortion check: 1 to 5 Crest factor,
• Resistance: 1 k or 10 k-ohm range, Temperature: -50 to 150 °C (9462 TEMPERATURE PROBE required, sold separately),
• Frequency: 100 or 1000 Hz, Mode: Slow/Peak/C.F./RMS/Record mode/Auto-off/Conduction
• Analog output None
• Frequency characteristics (at AC current / voltage) 40 to 1000 Hz
• Display section Digital / 3000 dgt. Bar graph / 35 seg.
• Sampling rate 2 or 4 times/sec (Slow: 1 times/3 sec)
• Crest factor (RMS) 2.5 (1.7 at 600 A, 600 V range)
• Max. circuit voltage 600 V AC rms (insulated wire)
• Power supply 6F22(006P) × 1, Continuous use 45 hours
• Core jaw dia. Ø 33 mm(1.30 in)
• Dimensions, mass 62 mm(2.44 in)W × 218 mm(8.58 in)H × 39 mm(1.54 in)D, 350 g (12.3 oz)
• Accessories TEST LEAD 9207-10 (1), CARRYING CASE 9399 (1), Hand strap (1)