|
Fluke 700HTP Hydraulic Test Pump
|
|
NOTE: Image is representative and may not be actual configuration.
|
|
Fluke 700HTP Hydraulic Test Pump
|
Enter Fluke Store
|
Description
Fluke 700HTP Hydraulic Test Pump
This pump can provide up to 10,000 psi using distilled water or mineral-based hydraulic oil. The pump is operated by pumping several strokes to prime the system, then switching to high pressure mode when the resistance increases. An integral pressure adjustment vernier knob varies the pressurized volume by 0.6 cc. The pressure variation achievable with the vernier will depend on the nominal pressure and total pressurized volume, but with a minimum volume, the vernier provided 150-3,000 psi (at 150 psi nominal) and 3,000-10,000 psi (at 3,000 psi nominal) adjustment ranges. With a minimum volume and no pressure applied, the vernier can also be used to provide a 0 to 1.7 psi range. Larger volumes will provide a smaller range of adjustment, but greater resolution.
Included:
- Adapter to connect the reference gauge port on the pump body to the 1/4 NPT male fitting on Fluke 700Pxx
- Pressure Modules (except 700P29, P30, and P31)
- Adapter to connect the reference gauge port on the pump body to the 1/4 NPT female fitting on the Fluke 700P29, P30, and P31 Pressure Modules
- Adapter to convert the unit under test port to a 1/4 NPT female
- Replacement seal kit
- Instruction sheet
|
Alternative Solutions:
Fluke 700HTP Hydraulic Test Pump
Fluke 718Ex-30G Intrinsically Safe Pressure Calibrator 30 PSIG
Fluke 718Ex-100G Intrinsically Safe Pressure Calibrator 100PSIG
Fluke 718-30G Pressure Calibrator -12 PSI to 30 PSI, (-850 mbar to 2 bar, -85 to 206.84 kPa)
Fluke 718-1G Pressure Calibrator -1 to 1 PSI, (-68.9 mbar to 68.9 mbar, -6.89 to 6.89 kPa)
Fluke 718-300G Pressure Calibrator -12 PSI to 300 PSI, (-850 mbar to 20 bar, -85 to 2068.42 kPa )
Fluke 718-100G Pressure Calibrator -12 PSI to 100 PSI, (-850 mbar to 7 bar, -85 to 689.48 kPa)
Fluke 717-500G Pressure Calibrator 0 to 500 PSI, (0 mbar to 34.7 bar, 0 to 3447.4 kPa )
Fluke 717-5000G Pressure Calibrator 0 to 5000 PSI, (0 bar to 345 bar, 0 to 34474 kPa)
Fluke 717-30G Pressure Calibrator -12 to 30 psi (-850 mbar to 2 bar, -85 to 207 kPa)
Fluke 717-300G Pressure Calibrator -12 to 300 PSI, (-850 mbar to 20 bar, -85 to 2068.4 kPa )
Manufacturers:
3M
Agilent
BK Precision
Extech
Fluke
Instek
Megger
|
|
Fluke 700HTP Hydraulic Test Pump
|
|
|
|
Part #: |
FLUKE 700HTP |
|
Condition: |
New |
|
Our Price:
|
$995.00
|
Call 888-610-7664 for quote
|
|
Get Answers Now!
|
|
Complete the RFQ form above and a knowledgeable sales engineer will contact you or chat online about your test equipment needs with a live sales engineer (9-5pm ET).
|
|
|
3 Reasons To Buy From Global Test Supply
- Competitive prices and low price guarantees to suit your budget!
- Risk free 5 day right-of-return and extended warranties on all equipment.
- Exceptionally responsive, knowledgeable customer service and timely delivery.
Satisfaction Guaranteed!
All Global Test Supply purchases offers a 5 day right-of-return. If the equipment you purchase does not meet your expectations, you have 5 business days to return for an exchange or full refund.
|
|
|
|
|
|
GlobalTestSupply.com is the #1 source for new and used T&M products and rentals. We sell, purchase, rent and lease products from leading manufacturers including
HP,
AEMC,
Agilent,
BK Precision,
Extech,
EZ Digital,
Fluke,
Hioki,
Instek,
Leader,
Megger, and
Tektronix.
Please email
or call 888-610-7664.
|
|
