T-Berd T-Carrier Analyzer
Automatic configuration and results summary
Automated sequences of test patterns for one-step circuit qualification and stress tests
Pulse shape analysis, signal level and frequency, simplex current, and wander measurements
Out-of-band ESF loop codes standard
Wideband and high band jitter measurement
Specifications
Input and Output Connectors: Bantam, WECO 310, 15-pin D, BNC
Input Impedance:
* Bridge: > 1000 ohms with ALBO
* Term: 100 ohms with ALBO
* DSX-MON: 100 ohms with AGC
Receive Level
* Bridge or term: +6 dBdsx to -35 dBdsx (T1), +3 dBdsx to -6 dBdsx (T1C)
* DSX-MON: +6 dBdsx to -24 dBdsx (T1), +3 dBdsx to -24 dBdsx (T1C)
Level Measurement: +6 dBdsx to -40 dBdsx; +6 to -6, 0.1 dB resolution; -6 to -40, 0.5 dB resolution
Frequency Measurement: 1 Hz resolutions; 5 ppm accuracy
Transmit Timing Sources: Internal Clock, External Clock, Reference Clock, Recovered Clock
Line Codes: AMI, B8ZS
Loopback Codes: CSU, CSU Line (ESF), CSU Payload (ESF), NIU (FAC1, FAC2, FAC3), NIU Network (ESF), Programmable (3 to 8 bits), Intelligent Repeaters
Pulse Masks: CB 119 (ANSI T1.102), ANSI T1.403-1989
Wander Measurement: +99999 UI, 1 UI resolution
Power Requirements: 115 VAC ±10%, 50 to 60 Hz
Optional Accessories: 40849-01: T-BERD T1 Channel Monitor
|
|
 |
The Global Test Supply Commitment
Global Test Supply is 110% committed to providing the highest quality, refurbished test equipment delivered with superior customer service!
|
Get Answers Now!
Complete the RFQ form to the right and a knowledgeable sales engineer will contact you regarding the 20 Volt / 2 Amp DC Power Supply or chat online about the 20 Volt / 2 Amp DC Power Supply with a live sales engineer (9-5pm ET).
|
|
|
