WaveSurfer Xs-A has a small form factor which packs a powerful processor that can handle long memory captures faster than any of the competition. The touch screen interface is the ultimate in ease-of use. With features like WaveStream fast viewing mode and WaveScan Search and Find, you can be confident that every problem can quickly be detected and analyzed.

Beyond these great features, the WaveSurfer offers a wide range of serial data trigger and decode tools for SPI, I2C UART, RS-232, LIN, or CAN as well as industry leading mixed signal capabilities to quickly troubleshoot embedded system designs. With bandwidths from 200 MHz to 1 GHz the WaveSurfer is the ideal oscilloscope for everyday design and debug.

Main Specifications

• Bandwidth 600 MHz
• Rise Time 500 ps
• Input Channels 2
• Display 10.4" Color flat-panel TFT-LCD, 800 x 600 SVGA, touch screen
• Sample Rate (single-shot) 2.5 GS/s
• Sample Rate (RIS) 50 GS/s
• Standard Record Length 5 Mpts/Ch (all channels)
• Standard Capture Time Up to 1 ms at full sample rate on all four channels
• Vertical Resolution 8-bits
• Vertical Sensitivity 2 mV/div–10 V/div (1 MΩ); 2 mV/div–1 V/div (50 Ω)
• Vertical (DC) Gain Accuracy ±1.0% of full scale (typical); ±1.5% of full scale = 10 mV/div (warranted)
• BW Limiting Filters 20 MHz, 200 MHz Maximum
• Input Voltage 50 Ω: 5 Vrms, 1 MΩ: 400 V max. (DC + Peak AC = 5 kHz)
• Input Coupling AC, DC, GND (DC and GND for 50 Ω)
• Input Impedance 1 MΩ || 16 pF, or 50 Ω
• Probing System BNC or ProBus
• Probes One PP009 (5 mm) per channel (standard)
• Time Base Range 200 ps/div–1000 s/div (roll mode from 500 ms/div–1000 s/div)
• Time Base Accuracy ≤ 5 ppm @ 25 °C (typical) (≤ 10 ppm @ 5–40 °C)

See datasheet for more technical specifications