Logic analyzers are known to be slow, complicated and expensive but LogicStudio changes all this by delivering a powerful feature set, high performance hardware and an intuitive point and click user-interface. With timing cursors, history mode, I2C, SPI and UART decoding, poweful triggering and simple navigation the PC is transformed in to an all-in-one debug machine. pair the LogicStudio 16 with a WaveJet 300A oscilloscope and debug systems with analog, digital and serial data signals.

• Input Channels 16
• Sample Rate 1GS/s on 8 Ch, 500 Ms/s on 16 Ch
• Minimum detectable pulse width about 3.75 ns
• Memory 40k points on 8 Ch, 20 kpts on 16 Ch
• Trigger Types Edge, pattern, pulse width, pattern width. I2C, SPI, UART
• Threshold Selections TTL, CMOS(1.8V, 2.5V, 3.3V, 5V), User defined
• User-defined Threshold Range 0-7V
• Maximum survivable input voltage +/- 40VDC
• Threshold accuracy +/- 150 mV + 5% of threshold
• Maximum Input dynamic range 40 V pk-pk
• Minimum voltage swing 500 mVpk-pk
• Input impedance 150k parallel 12pF
• Channel-to-Channel Skew 1ns typical
• Trigger resolution 500MS/s 
• Host port USB 2.0, bus-powered peripheral
• Size 3.2” x 4.9” x 1.1” (81.3 mm x 124.5 mm x 28.0 mm)

Lively, Dynamic Display
LogicStudio is fast! Waveforms update quickly and panning or zooming is extremely responsive. Download the software and exprience it yourself!

Sleek and Sophisticated User Interface
The software interface is modern and intuitive creating a new logic analyzer experience

Simple Mouse Operation
LogicStudio is intuitive and easy to operate with freiendly left-click and right-click controls plus all buttons are on the main screen, no complicated menus to navigate

Protocol Decoding and Data Trigger
View decoded protocol information for I2C, SPI and UART busses plus trigger on data being transmitted on the serial busses

Cursors
Quickly measure the time between transistions on a single line, across digital lines of from a digital line to an analog waveform. Snap the cursors directly to the waveform edge for precise measurements

Waveform Mangnifier
Get a better view of the waveforms by passing over them with the magnifier, scroll the mouse wheel to zoom in for an even closer look

History
Did something interesting or surprising jusrt flash across the screen, stop the trigger and flig through a history of the previous 100 acquisitions.

Powerful Triggering
For difficult problems a simple edge or logic level trigger is not enough. LogicSTudio advanced triggering provides an environment for creating powerful combinations of edge, logic level, parallel bus and serial bus triggers to isolate difficult problems.

MSO PC capabilities
Connect a WaveJet 300A to the same PC as the LogicStudio 16 and turn the PC into a Mixed Signal Oscilloscope displaying digital, serial and analog signals simultaneously.

Persistance
View variations in the signals over time to find problems faster. Use with history mode to see what happened when and isolate the problem

Interleaving for Higher Performance
Use all 16 channels at 500 MS/s or 8 channels at 1 GS/s for more timing resolution

Logic Thresholds
Choose from standard TTL and CMOS levels or crete a custom level from 0-7V