The Huntron 2000 Tracker is the ideal complement to every test equipment arsenal. Since testing is done in circuit, with the power off, the Tracker can quickly isolate failures at the component level and find faults that scopes, multimeters and expensive ATE can not. The 2000 gives the operator the ability to dynamically test a wide range of devices with a choice of three frequencies (50/60Hz, 400Hz and 2000Hz) and a pulse generator with adjustable output level (0 to +/-5V) and duty cycle (approx. 0 to 100%). Current vs. voltage signature isolates defective analog, digital and hybrid components and boards without programming or fixturing Adjustable rate Compar-A-Trace mode compares signatures of suspect components and boards with known-good parts Four impedance ranges with auto and manual ranging and high-range lockout

Specifications:

• Test Frequencies:
  • 50/60 Hz, 400 Hz, 2000 Hz
• Functions Range Selection:
  • Auto or Manual High Range Lockout
• Compar-A-Trace:
  • Adjustable (0.5 Hz to 10 Hz)
• Pulse Generator:
  • Level: 0V to 5V
  • DC Mode: +DC or -DC
  • Pulse Mode: +Pulse, -Pulse, or both; adjustable duty cycle
• Line Voltage:
  • 100 VAC, 115 VAC or 230 VAC
• Power:
  • 20 Watts maximum
• Display:
  • 2.8 in (7.0 cm) diagonal CRT
• Dimensions:
  • 11 in L x 9 in W x 4 in H, (28 cm L x 23 cm W x 10 cm H)
• Weight:
  • 6.5 lb (3.0 kg)
• Operating Temp:
  • +32 F to 122 F (0 C tp 50 C)
• Storage Temp:
  • -58 F to + 140 F (-50 C to + 60 C)
• Test components and boards without power - ideal for catastrophic failures
• Get a picture of a component's overall health - including intermittent problems
• Test gate-fired devices with a built-in pulse generator
• Non-destructive testing