Digital hot wire anemometer and temperature

• Hot wire anemometer is required to accurately measure below 80 feet/minute
• Measure air velocity and temperature simultaneously
• Record & recall Max, Min, & Avg
• Data hold
• Auto power off (10 min.)
• Low battery display
• Multiple measuring units: (m/s, k/h, mile/h, knots, ft./min)
• Download to a computer using the RS-232 port and optional A500 cable
• 39” cable length, hard-wired

Specifications:

• Air Velocity (Hot wire thermistor)    
• 40 to 3900 ft/min
• 0.2 to 20 m/s
• Units of Measure: m/s, km/s, ft/min, mile/hr, knots/hr
• Air Velocity Accuracy: ±(5% of rdg + 3 digits)
• Temperature (Precision thermistor)    
• -5°F to 175°F
• -20°C to 80°C
• Temperature Accuracy: ±(1% of rdg + 1°F + 3 digits)
• Units of Measure: °C / °F
• CFM Calculation: Manual using formula
• RS-232 Output: Yes
• Min/Max Record: Yes
• Operating Temperature (Base Unit): 32°F to 122°F
• Operating Humidity (Base Unit): <95% non-condensing
• Battery Type: 9V
• Battery Life: 30 hours typical
• Dimension W x L x H: 2.9” x 5.7” x 1.1”
• Weight: 0.3lb

Applications:

• Air velocity measurements in heating, ventilation, and air conditioning systems
• Where low and high feet per minute readings are critical you must use a hotwire below 80 ft. per minute