• View Cart (0)
  • |
  • Quote Cart (0)
  • |
  • Site Map
1-888-610-7664
Go

TPI 192 True RMS 50,000 Count Digital Multimeter with inductance

TPI 192
TPI Store

View TPI Products Visit TPI Store

No Reviews yet for this product

MFG Part # TPI 192
Condition New
Our price $229.95

Data logging, 0.05% accuracy, 50,000 count, True RMS DMM with separate fuse and battery compartment.

  • Data logging
  • 50,000 count display
  • 0.05% DCV basic accuracy
  • True RMS
  • Inductance
  • Frequency
  • Capacitance
  • 0 to 750 ACV; max resolution 100uV
  • 0 to 1,000 DCV: max resolution 0.001mV
  • 0 to 50MΩ; max resolution 0.01Ω
  • Audible continuity
  • AC/DC amps up to10 amps; resolution 0.01 uA
  • Analog bar graph
  • Min/Max
  • Data hold
  • Power off
  • Separate fuse and battery compartment

Applications:

  • Thermocouples in furnaces or gas applications
  • Heat anticipator current in thermostats
  • Line voltage
  • Control circuit voltage
  • Flame safeguard control current
  • Heating element resistance (continuity)
  • Compressor winding resistance
  • Contactor and relay coil resistance
  • Continuity of wiring
  • Motor start and run capacitance
  • Frequency on controls and line voltages
  • Record min/max voltage of controls and line voltages
  • Temperature with optional temperature adapter (A310)
  • Bar graph to indicate rapid fluctuations in measurements
  • Voltage of direct drive DC motors
  • Measure power supply voltage
  • Match components
  • Compare readings in circuits and components
  • Frequency of line and control voltage

Specifications:

  • DC Volts     
    • Maximum Input: 1000V Maximum Resolution: 0.001mV Accuracy: +/-0.05%
  • AC Volts    
    • Maximum Input: 1000V Maximum Resolution: 100mV Accuracy: +/-0.4%
  • DC Amps    
    • Maximum Input: 10A Maximum Resolution: 0.01mA Accuracy: +/-0.15%
  • AC Amps    
    • Maximum Input: 10A Maximum Resolution: 0.01mA Accuracy: +/-0.75%
  • Resistance (Ohms)    
    • Maximum Input: 50MΩ Maximum Resolution: 1mΩ Accuracy: +/-0.05%
  • Frequency    
    • Maximum Input: 5MHz Maximum Resolution: 0.001Hz Accuracy: +/-0.05%
  • Capacitance    
    • Maximum Input: 20mF Maximum Resolution: 0.01nF Accuracy: +/-2%
  • Inductance    
    • Maximum Input: 300mH Maximum Resolution: 0.01mH Accuracy: +/-5%
  • Temperature (K-Type Thermocouple)    
    • Maximum Input: -54°F to 2462°F (-50°C to 1350°C) Maximum Resolution: 0.1°F / °C Accuracy: +/-2%
  • Continuity     Audible at less than 10Ω
  • Diode     3V at 1mA maximum output
  • Duty Cycle    
  • Maximum Input: 99.9% Maximum Resolution: 0.1%
  • True RMS Responding     Yes
  • Conductance     Yes
  • Pulse Width     Yes
  • Data Hold     Yes (Two hold system)
  • Min/Max Record     Yes
  • Time Stamp Logging     Yes
  • Relative Mode     Yes
  • Compare Mode     Yes
  • RS-232 Output     Yes, Optically Isolated
  • Process Loop Output     No
  • Sleep Mode / Auto Off     Yes
  • Protective Boot     Yes (standard)
  • Display Type     50,000 count backlit LCD with dual sub displays and analog bargraph
  • Range Selection     Auto / Manual
  • Operating Temperature     32°F to 113°F (0°C to 40°C)
  • Storage Temperature     -4°F to 140°F (-20°C to 60°C)
  • Humidity     80% non-condensing
  • Size     8.3” x 3.7” x 1.9” (210mm x 95mm x 47mm) without boot 8.7” x 4.3” x 2.6 (220mm x 110mm x 65mm) with boot
  • Weight     1.3lbs (570g) without boot 1.9lbs (850g) with boot
  • Battery Type     9V Alkaline (NEDA 1604)
  • Battery Life     50hrs Typical
  • Overvoltage Category     CAT III 600V
  • Agency Approval     cULus 61010-1, IEC 61010-1
  • Warranty     Limited Lifetime
2725-2A Old Wrightsboro Rd. Wilmington, NC 28405 Remit Address: PO Box 602601 Charlotte NC 28260-2601 Copyright 2003-2012 Global Test Supply All rights reserved.