Compact DMM with adapter range for optional accessories, 0.5% DCV basic accuracy

• 2,000 mvDC   (2 DCV) adapter range
• 2,000 count display
• 0 to 600 volts AC and DC
• 0 to 2,000 ohms
• Audible continuity
• 10 MOHM internal impedance
• 0.5 % DCV basic accuracy

HVAC/R APPLICATIONS

• Line voltage
• Control circuit voltage
• Heating element resistance (continuity)
• Compressor winding resistance
• Contactor and relay coil resistance
• Continuity of wiring

ELECTRICAL APPLICATIONS

• Measure line voltage.
• Continuity of circuit breakers
• Voltage of direct drive DC motors

Specifications:

• DC Volts     
  • Maximum Input: 600V Maximum Resolution: 1mV Accuracy: +/-0.5%
• AC Volts    
  • Maximum Input: 600V Maximum Resolution: 1mV Accuracy: +/-1.2%
• DC Amps     N/A
• AC Amps     N/A
• Resistance (Ohms)    
  • Maximum Input: 2KΩ Maximum Resolution: 0.001KΩ Accuracy: +/-0.5%
• Frequency     N/A
• Capacitance     N/A
• Inductance     N/A
• Temperature (K-Type Thermocouple)     N/A
• Continuity     Audible at less than 100Ω
• Diode     N/A
• Duty Cycle     N/A
• True RMS Responding     No
• Conductance     No
• Pulse Width     No
• Data Hold     Yes
• Min/Max Record     No
• Time Stamp Logging     No
• Relative Mode     No
• Compare Mode     No
• RS-232 Output     No
• Process Loop Output     No
• Sleep Mode / Auto Off     No
• Protective Boot     Yes (standard)
• Display Type     2000 count LCD
• Range Selection     Manual
• Operating Temperature     32°F to 104°F (0°C to 40°C)
• Storage Temperature     14°F to 122°F (-10°C to 50°C)
• Humidity     80% non-condensing
• Size     6” x 3.1” x 1.2” (187mm x 86mm x 33mm) with boot
• Weight     12oz (340g) with boot
• Battery Type     9V Alkaline (NEDA 1604)
• Battery Life     500hrs Typical
• Overvoltage Category     CAT III 600V
• Agency Approval     IEC 61010-1
• Warranty     3 Years