·         Low Charging Transparent Cellulose Film (2.4 Mils Thick) With
High-Tack Rubber Adhesive

Wescorp tape generates less than 50 volts when unwound from roll (at 73°F, 45% RH average) making it safe to use around most ESD sensitive items.*

·         Marked with ESD Symbols (MIL STD-1285 and ESDA) Between Film and Adhesive

ESD symbols distinguish ESD version tapes from standard, non-ESD tapes.

·         Surface Resistance 10E8 - 10E10 Ohms

Tested per ANSI/ESD S11.11 to meet dissipative limits of packaging standard ANSI/ESD S541.

·         Temperature Range 10°C - 71°C (14°F - 160°F)

Meets MIL-B-81705 for exposure to 100°C for 10 minutes max.

·         Lead-Free RoHS Compliant

Estimated Shipping Weight: 0.26 Pounds

*All tapes will generate some amount of triboelectric charge when unwound from roll.  Standard, non-ESD tapes typically generate more than 1000 volts when unwound from roll.  If you require less voltage than 50 volts, a grounded tape dispenser or ionization is recommended when unrolling the tape.