• Aluminum metal outer layer of laminated film
  Metal out required by many end users
• 40% light transmission
  Allows for identification of bag contents
• Integral antistatic, low tribocharging properties
  Bag contents will not electrostatically charge during movement
• Integral static dissipative properties
  Not topically treated, not humidity dependant, won't wear off
• Manufactured on specially designed soft fold converting machines
  Prevents scratches and creases maintaining the integrity of Faraday Cage shielding protection
• Large 3/8" wide seals - high performance interior sealing layer
  Greater sealing surface provides greater seal strength compared to comparable products with 1/8" wide seals; higher quality, more durable
• Identified with ESD Protective Symbol as required by ANSI/ESD S541 with lot code #.
  Improved quality control tracking and identified as ESD packaging.
• Lot coded
  Quality control traceability
• Polycarbonate compatible containing no amines or N-octanic acid
  Non-corrosive, will not contaminate parts
• Testable to industry standards
  Meets or exceeds one or more of the following standards: electrical and physical requirements of ANSI/ESD S20.20, Mil-PRF-81705D Type II, EIA 541, EIA 625, MIL-STD-1686, and EIA 583
• Antistatic, low charging, reclosable zipper
  
• Lead-free RoHS compliant
• Made in America

The bag's material meets the performance specification requirements of Mil-PRF-81705D, Type III.

Sold in packages of 100 bags packaged in a protective oversized ESD bag.

Resistance of outer surface: <10E8 ohms
Resistance of metal layer: <10E2 ohms
Resistance of inner surface: <10E11 ohms
Thickness: Nominal .0030" (.0762mm) ±10%

ANSI/ESD S541 Section 6.2 Outside an EPA:

“Transportation of sensitive products outside of an EPA shall require packaging that provides:

1. Low charge generation

2. Dissipative or conductive materials for intimate contact

3. A structure that provides electrostatic discharge shielding.”