Phase II PHT-2700 Mini-Integrated Hardness Tester

The PHASE II hardness tester, Model No. PHT-2700 is an advanced integrated hardness tester distinguished by its very compact size, high accuracy, wide measuring range and simplicity of operation. It is suitable for testing the hardness of all metals and widely applied in many areas of industry.

The PHT-2700 hardness tester combines the universal impact device D and a data processor in a single unit. It automatically computes all Vickers, Brinell, Rockwell and Shore hardness values. RS232 output enables this new model to print any of it’s memory from up to 2000 locations. The impact direction can be set so that the accurate values can be achieved at any angle, even upside down! Statistical mean value is automatically provided.

The measuring method of the PHT-2700 is defined as “the quotient of the impact body’s rebound velocity over its impact velocity”. Optional accessories include various support rings to meet the requirements of specialized convex or concave applications.

Technical Specifications: 

• Dimensions: 6.10” x 2.36” x 1.49” (155 X 60 X 38mm)
• Impact Device: D
• Impact Energy: 8 Ft-Lbs (11nmm)
• Test Tip: Tungsten Carbide
• Measuring Accuracy: +- 0.8% (Corresponding To +- 1 Hrc At Hrc=58)
• Max. Hardness of Sample: 980hv
• Weight: 0.48lb (220g)
• Impact Dimension: Any Angle
• Operating Temperature: 32 To 122 Degrees F (0 To 50 Degrees C.)
• Min. Weight of Sample: 11 lbs / 5kg
• Min. Radius of Curved Surface:
• 1.2in (30mm) (With Support Rings:11mm)
• Power: 2- AAA Batteries (supplied)