Mark-10 EG10 Force Gauge, 10 x 0.01 lb, 5 x 0.005 kgF, 50 x 0.05 N, 110V

Features include selectable units of measurement, automatic peak memory, simple pushbutton calibration, programmable automatic shutoff, initial status of units and mode of operation, permanent configuration memory, and optional outputs (RS-232, Mitutoyo, and analog). Reversible aluminum housing allows for hand-held use or test stand mounting. FEATURES:

• Compatible with all Mark-10 test stands and grips
• Selectable units of measurement
• Programmable default configuration
• Peak memory for tensile and compressive forces
• Push-button calibration
• Battery or AC operation
• Programmable automatic shutoff
• Permanent configuration memory
• Optional RS-232, Mitutoyo and analog outputs
• Reversible aluminum housing for handheld use or test stand mounting (see below)
• Same housing size for all capacities
• Accuracy: ± 0.3% of full scale ±1 digit
• Sampling rate: 30 readings/sec
• Safe overload: 150% of capacity
• Battery life: 8-10 hours per charge
• Weight: 0.9 lbs (0.4 kg)
• Environmental requirements: 40°F - 100°F [5°C - 45°C], <96% humidity (non-condensating)
• Warranty: 3 years
• CE mark