• Top of its Class in Safety
• CATIV 600V/CATIII 1000V Safe
• No metallic exposure ensures absolutely safety to the operator
• Wide clips compatible to thick cables of up to 40mm in diameter

Specifications:

• Measurement Function Phase detection (positive,negative),live wire check (R-S/S-T only)
• Voltage Detection Method Electrostatic induction method
• Voltage Range 70 to 1000VAC (50/60Hz)(sine wave,continuous input)
• Clamp Diameter 10 to 40mm of insulated wiring
• Display Phase Detection : Positive ; 4 LEDs lit in clockwise order and 3 short beeps
• Negative ; 4 LEDs lit in counterclockwise order and one continuous beep
• Live Wire Check : R-S and S-T lamps will light if voltage between wires are within voltage range
• Battery Check Function ON lamp blinks to indicate battery low status when instrument is turned on
• Auto Power Off Auto shut off if no activity is detected after power is turned ON for 15 minutes
• Power supply Two AA size batteries × 2 (rated voltage:DC3.0V; maximum rated ower:300mVA)
• Continuous Use approx.70 hours (standby)
• Dimensions, mass 70 mm (2.76 in)W x 75 mm (2.95 in)H x 30 mm (1.18 in)D, 240g (8.5 oz),
• Cord length : 0.7m(27.56 in)
• Accessories Carrying case(1), strap(1), R6P manganese batteries(2), spiral tube(1)