Hioki 3664 Optical Power Meter

FEATURES:

• Highly versatile optical power meter for production lines, R&D and maintenance
• Compensation function for the laser light source testing
• Dual power system
• Fully remote operation via USB interface

SPECIFICATIONS:

• Optical power measurement W, dBm
• Range setting Auto (Manual setting available)
• Accuracy ±0.7% (±5% in combination with the optional sensor)
• Wavelength sensitivity compensation Can be set for every 1nm.
• Automatic compensation for the sensor’s sensitivity
• Max. 10 wavelengths preset (including initial value for a sensor)
• Scaling Can be set for each wavelength.
• Relative measurement Display the relative value to the measured value or set value. (Displayed value = Measured value – Reference value) Reference value can be set from the measured value or manual input.
• Settable range: 0.001nW to 1.9999W (-90.00dBm to 33.00dBm)
• Display 4-1/2 digit, (19999 max.), Display resolution: 0.01dBm / 0.01dB
• Measurement display unit nW, mW, mW, dBm, dB
• Wavelength display 4 digit, Unit: nm
• Display update rate 330ms approx.
• MAX/MIN display Maximum and minimum value display while measurement
• Average display Display the moving average value.
• Averaging times: 2 to 100
• Analog output 1V approx. when the sensor calibration point input
• Output resistance 50W
• Output connector ø3.5 mini jack
• Interface Output measurement value and remote control
• Auxiliary functions Auto power save, Setting backup, Battery check
• Safety EN61010-1: 2001 Pollution degree 2
• Power supply AA (LR6) × 4, AC adapter (9445-02
• Max. rated power 1.6VA
• Continuous battery operation 60 hours approx. (continuous use with the 9742 at calibration point input)
• Dimensions and weight 85(W) × 160(H) × 35(D) mm, 270g (excluding batteries)