Hioki 3193 POWER HiTESTER

Wide spectrum power meter for comprehensive device assessment This product is a multi-function power meter for use with single phase power lines to 3-phase, 4-wire circuits. Accommodating up to 6 units, it is not only capable of measuring up to 6 single phase systems, but can simultaneously measure the input and output of a 3-phase inverter and provide effective power measurements. Additionally, it supports harmonic analysis and flicker measurement (optional), features which are essential for overall device assessment. S

PECIFICATIONS:

• Measurement lines : Single-phase/two-wires to three-phase/four-wires (Through the use of various input units)
• Measurement items : (When using 9600, 9601, 9602, optional) Voltage, current, voltage/current peak, effective/reactive/apparent power, power factor, phase, frequency, current/power integration, load rate, efficiency(When using 9603, optional) Voltage, torque, RPM, frequency, motor output (When using 9605, optional) Harmonic, waveform, voltage fluctuation / flicker measurement function
• Measurement ranges : Voltage: 6.0000 V to 1.0000 kV (depends on use of the input unit) Current: 200.00 mA to 500.00 A (depends on use of the input unit) Power: Depends on combination of voltage and current ranges Integration range : 0 to ±999999TAh/TWh, (integration time up to 10000 hours)
• Basic accuracy :used with 9600 to 9602 Input unit ±0.1% rdg. ±0.1% f.s. (voltage, current, power, at 45 to 66Hz) Note: When used together with the 9270 to 9272, and 9277 to 9279, resulting accuracy is the sum of that indicated above and the accuracy of these clamp sensors.
• Frequency characteristics : used with 9600: DC, 0.5 Hz to 1 MHz used with 9601: 5 Hz to 100 kHz used with 9602: DC, 0.5 Hz to 200 kHz (depends on the clamp accuracy)
• Signal output : Analog level: Voltage, current, active power, 5 VDC f.s. Waveform monitor: Voltage, current, 1 Vrms f.s. D/A output: Outputs 8 arbitrarily selected items, DC±5 V f.s.
• Other functions : 6.4 inch TFT color LCD, RMS/MEAN rectification, FDD, GP-IB/RS-232C interface, scaling, averaging
• Power supply : 100/120/200/230 VAC (switched automatically), 50/60 Hz
• Dimensions, mass : 430W × 150H × 370D mm, 15 kg (with all options)
• Accessories : Power cord(1), Connector(1)