A compact digital multimeter for electronics and test applications

• The 15XP-B is the right choice for electronics engineers, technicians and field service
• Autoranging display for faster measurements
• TTL logic test for digital circuits
• Integrated tilt stand for easy bench use
• Diode test for component level troubleshooting
• Data Hold freezes display to “hold” measurement reading
• 750 V AC / 1000 V DC—highest voltage rating in this size of meter
• Special 2000M ? measurement range

Features:

• Warranty:  One-year
• Battery Life: 200 hours typical with carbon-zinc
• Size:  (H x W x D) 155 mm x 72 mm x 32 mm (6.1 x 2.83 x 1.26 IN)
• Weight:  Approx. 210 g (0.46 Lb) including battery
• Safety:  CAT II 1000V, CATIII 600V, CE, N10140

Specifications:

• Display: 3-1/2 digit liquid crystal display (LCD) with a maximum reading of 1999
• Polarity:     Automatic, positive implied, negative polarity indication
• Overrange:   (OL) or (-OL) is displayed
• Zero:     Automatic
• Low Battery Indication:    The ”+” is displayed when the battery voltage drops below the operating level
• Auto Power Off:     Approx. 10 minutes
• Measurement Rate:     2 times per second, nominal
• Operating Environment:       0 °C to 50 °C at <70 % R.H.
• Accuracy:      Stated accuracy at 23 °C ± 5 °C, <75 % relative humidity
• Power:   Single standard 9 volt battery, NEDA 1604, JIS 006P, IEC 6F22
• DC Volts Ranges:     200 mV, 2 V, 20 V, 200 V, 1000 V ± (0.5 % rdg + 1 dgt)
• AC Volts (45 Hz to 500 Hz) Ranges:     200 mV (45 Hz to 100 Hz) ± (1.5 % rdg + 5 dgts)
• AC Volts (45 Hz to 500 Hz) Ranges:      2 V, 20 V, 200 V, 750 V ± (1.5 % rdg + 5 dgts)
• DC Current Ranges:      200 µA, 2000 µA, 20 mA, 200 mA ± (1.0 % rdg + 2 dgt)
• DC Current Ranges:   2 A ± (2.0 % rdg + 3 dgts)
• AC Current (45 Hz to 500 Hz) Ranges:   200 µA, 2000 µA, 20 mA, 200 mA ± (1.5 % rdg + 5 dgts)
• AC Current (45 Hz to 500 Hz) Ranges:   2 A ± (2.5 % rdg + 5 dgts)
• Resistance:   200 ? , 2 k? , 20 k? , 200 k? , 2 M? ± (1.0 % rdg + 4 dgts)
• Resistance:    2000 M? ± {5.0 % (rdg -10 dgts) +20 dgt}
• Continuity Audible Indication:   Less than 25 ?
• Diode Test Test Current:    1.2 mA (approximate) ±(1.5 % rdg + 3 dgts)
• Logic Test:    TTL
• Non-Contact Voltage Indicator:   Sense voltage 70 V to 600 V ac (50 Hz to 60 Hz) beeper chirps and big bright red LED comes on, works on all ranges