Speak to a Sales Technician

AEMC 2113.44 SR604 AC Current Probe


Your Price $189.00
Inventory 1 to 2 Weeks

 The SR604 is a general purpose 1000AAC current probe designed for use with DMMs, loggers and other instruments that have a current input. It has a 1000:1 ratio and output of 1mA per amp measured in the jaw. The SR604 has an integral 5 ft (1.5m) lead terminated shrouded banana plugs. The rounded jaw design on this probe makes it well-suited for power applications where high accuracy and low phase shift is important.

  • Power quality measuring
  • Large industrial loads
  • Measuring around cable bundles
  • Power load monitoring
  • Waveform analysis

Electrical Specifications
Operating Range 0.1 to 1200A
Operating Range
Current Range 0.1 to 1000AAC
Frequency Range 30Hz to 5kHz; current derating above 1kHz using the formula: (1000A * ) / F (in kHz)
Common Mode Voltage 600VAC
Crest Factor £6
Current Overload 1200A for 40 min ON, 20 min OFF
Load Impedance 5W max
Open Secondary Voltage <25V by limiting circuit
Reference Conditions 23°C ±3°K, 20 to 85% RH, 48 to 65Hz, external magnetic field <40A/m, no DC component, no external current carrying conductor, test sample centered, load impedance 5W
Ratio 1000:1
Working Voltage 600V, Cat. III
Influence of Adjacent Conductor
Influence of Adjacent Conductor <1mA/AAC
Influence of Conductor Position
Influence of Conductor Position 0.1% of Reading @ 50/60Hz
Influence of Frequency
Range Value 30 to 48Hz / 65 to 1000Hz / 1 to 5kHz
Influence of Frequency < 1% of Reading / < 0.5% of Reading / < 1% of Reading
Influence of Humidity
Influence of Humidity 10 to 90%: £0.1%
Output Signal
Output Signal 1mAAC/AAC (1A AC at 1000A)
Accuracy Per IEC 185-26-27
Mechanical Specifications
Altitude Operating: 0 to 2000m; Non-operating: 0 to 12km
Colors Dark gray handles with red jaws
Dimensions 4.37 x 8.50 x 1.77" (111 x 216 x 45mm)
Drop Test 1m (IEC 68-2-32)
Jaw Opening 2.25" (57mm) max
Material Handles: Polycarbonate +ABS Gray: UL 94 V0; Jaws: Polycarbonate, Red: UL 94 V0
Maximum Bus Bar Size 1.95 x 0.19" (50 x 5mm)
Maximum Cable Diameter 2.05" (52mm)
Mechanical Shock 100g (IEC 68-2-27)
Operating Temperature 14° to 122°F (-10° to 50°C)
Operating Relative Humidity 0 to 85% @ 35°C
Output 5 ft (1.5m) lead with 4mm safety banana plug
Protection Index (IP) IP 40 (IEC 529)
Impact Test IK04 0.5 J EN50102
Storage Temperature -4° to 158°F (-20° to 70°C)
Vibration Test per IEC 68-2-6
Range Value 5 to 15Hz / 15 to 25Hz / 25 to 55Hz
Vibration Amplitude: 0.15 mm per IEC 68-2-6 / Amplitude: 1 mm per IEC 68-2-6 Amplitude : 0.25 mm per IEC 68-2-6
Weight 1.21 lbs (550g)
External Influences
Influence of Temperature <0.1% per 10K°
Safety Reference Specifications
Safety Ratings EN 61010-2-32
Agency Approvals CE Mark
Calibration Lab

Ask a question about the AEMC SR604 Current Transformer:

comments powered by Disqus