1-888-610-7664
Speak to a Sales Technician

Extech 382068 Clamp-on Power Datalogger Kit 1000A True RMS

Model: 382068

Extech 382068 1000A True RMS AC/DC Clamp-on Power Datalogger Kit

Sorry! This product has been discontinued.


The Extech 382068 1000A True RMS AC/DC Clamp-on Power Datalogger Kit has been discontinued, and does not currently have a replacement. If you would like a recommendation please call us at 1.877.766.5412


Extech 382068 1000A AC/DC Clamp-on Power Datalogger Kit

1000A AC/DC Clamp-on Power Datalogger Kit

Datalogs up to 4000 readings

Capture data and transfer to a PC for analysis and report generation

Key Features:

  • 1000A Clamp measures single f (phase) or 3f power to 600kW
  • Display True Power, Apparent Power, Power Factor, True RMS Voltage and Current, Resistance and Frequency
  • Dual display of kW+PF, kVA+PF, V+A, A+Hz or V+Hz Clamp jaws open to 1.8" (46mm)
  • Built-in recorder datalogs up to 4000 readings or download to a PC
  • 25 point data memory viewable on the LCD display Data Hold and Auto power off
  • Full function display on large 4-digit LCD with fast 40 seg. bargraph, Peak Hold, and MIN/MAX
  • Complete with Clamp-on Meter, 9V battery, alligator clips, test leads, Datalogger/RS-232 module
General Specifications
Main display4-digit (10000 count) multi-function LCD
Bargraph display40-segment bargraph
Datalogger4000 data point continuous logging (25 point manual logging) with MIN / MAX and Peak detect recording
Peak holdBuilt-in detector captures positive and negative peaks to .1ms
Maximum voltage600Vrms between any terminal and earth ground
Meter power9V battery
Battery life30 hours (approx.)
Low battery indicationBattery icon is displayed
Auto power offAfter 30 minutes (approx.)
Display update rate2 times per second (Bargraph); 5 times per second (Digits) (once every 6 seconds for the KW function)
Jaw opening For Cablesφ 1.8" (46mm)
Operating temperature32 to 122°F (0 to 50°C)
Operating Humidity R.H.< 80% non-condensing.
Storage temperature14°to 140°F (-10 to 60°C)
Storage Humidity RH< 70% non-condensing
Dimensions/Weight10.24 x 3.66 x 1.77" (260 x 93 x 45mm) / 1 lb. (450g)
AccessoriesCarrying case test leads and 9V battery
Range Specifications
AccuracySpecs are ± (reading + no. of digits) at 64° to 82°F (18° to 28°C) and RH to 80%
Includes:

Complete with Clamp-on Meter, 9V battery, alligator clips, test leads, Datalogger/RS-232 module, PC software with cable, and case

Popular Accessories

Extech 480172 AC Line Splitter 480172 7314
AC Line Splitter - Allows clamp meter to measure AC Current on a 2-wire or 3-wire power cord
$15.99 USD
Checking inventory...

Calibration Lab


Ask a question about the Extech 382068 1000A True RMS AC/DC Clamp-on Power Datalogger Kit:

comments powered by Disqus