HP/Agilent 5518A Laser Head and Receiver
No Reviews yet for this product
| MFG Part # | HP/AGILENT 5518A |
| Condition | Refurbished |
| Refurbished | Call for quote: 888-610-7664 |
Want Us To Email You A Quote?
Quote only This Product?
Please fill out this form below
HP/Agilent 5518A Laser Head and Receiver Features
- Helium-neon, continuous wave, two-frequency laser
- Fast warm-up (typically four minutes)
- Internal measurement receiver
- Weight: 5.5 Kilograms (12 pounds)
- Magnetic Field Strength (Non-Operating): Does not exceed 5.25 milligauss at a distance of 460 cm (15 ft) from any point on the surface of the packaged Laser Head.
- Clearance Required for Cabling: 10.16 cm (4 in) beyond back
- Power Input Requirements: +15 Volts +/- -0.3 Volts at 25 Amperes maximum, -15 Volts +/-0.l3 Volts at 0.02 Ampere maximum
- Heat Dissipation: 23 watts during operation, 35 watts during warmup
- Maximum Beam Power Output: 1 milliwatt
- Minimum Beam Power Output: 180 microwatts
- Beam Diameter: 6 millimeters (0.25 inch) typical
- Vacuum Wavelength Accuracy (3 sigma, lifetime): 0.1 ppm
- Vacuum Wavelength Stability: Typical 1 hour: 0.002 ppm
- Typical lifetime: 0.02 ppm
- Nominal Vacuum Wavelength: 632.99137 nanometers
- Reference Frequency: 1.7 to 2.4 MHz for Agilent 5518As with serial number 2532A02139 and above, 1.5 to 2l.0 MHz for previous Agilent 5518As
Best sellers
