Each Agilent 1670G Series pattern generator (Option 004) needs one clock pod and up to four data pods. Each data pod provides eight output channels. Order 1 to 4 sets where a set is (1) of these 8-Channel data pods + (1) 10474A lead set. FEATURES:

• Output typenote 2: 74ACT11244 with 100 O series; 10H125 on a non 3-state channel 7
• 3-State enable: negative true, 100 kO to GND, enabled on no connect
• Maximum clock: 100 MHz
• Skewnote 1: typical <4 ns; worst case = 12 ns
• Recommended lead set: Agilent 10474A
• Note 1: Typical skew measurements made at pod connector with approximately 10 pF/50 kO load to GND; worst case skew numbers are a calculation of worst case conditions through circuits.
• Note 2: Channel 7 on the 3-state pods has been brought out in parallel as a non 3-state signal. By looping this output back into the 3-state enable line, the channel can be used as a 3-stated enable.